TEKTELIC-KONA-MACRO-MIB DEFINITIONS ::=BEGIN
IMPORTS 
    MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, IpAddress,
    Unsigned32, Counter64, Integer32, NOTIFICATION-TYPE     FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DisplayString                       FROM SNMPv2-TC
    OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP     FROM SNMPv2-CONF    
    tekProducts, tekExperimental                            FROM TEKTELIC-MIB
;
kona MODULE-IDENTITY
	LAST-UPDATED "201809010000Z"
	ORGANIZATION "Tektelic Communications Inc"
	CONTACT-INFO "Dave Tholl"
	DESCRIPTION  "Kona Interface MIB"
	REVISION     "201809010000Z"
	DESCRIPTION  "revision 0.24 - Added ability to modify network interfaces file"
	REVISION     "201808070000Z"
	DESCRIPTION  "revision 0.23 - Added wireless modem FW upgrade OIDs
								- Added battery status for micro
								- Added requestRailReset option in konaReset
								- Added option to delete restore point in swRestorePointExecute"
	REVISION     "201807030000Z"
	DESCRIPTION  "revision 0.22 - Added number of SX1301s for module identification
								- Added size to utilConfigurationFileContents oid
								- Fixed inconsistent return value for SW upgrade/install
                                - Created superset MIB containing all Kona flavours, product specific MIB will be parsed/generated at installation time
                                    Product specific parts braced with --START <product> and --END <product> for parsing. So far have MEGA/MICRO/PEARL.
								- Removed unimplemented OIDs (log streaming)"
	REVISION     "201804270000Z"
	DESCRIPTION  "revision 0.21 - added wmSimStatus, wmApnLastOperationStatus, wmRemoveApn, wmAddApn
					Updated table to include wmApnWorkingIndex"
	REVISION     "201803140000Z"
	DESCRIPTION  "revision 0.20 - Change swBackupExecute type to Unsigned32
					Added OID to set APN, APN table is now read only."
	REVISION     "201802050000Z"
	DESCRIPTION  "revision 0.19 - Added APN, radio properties (lo, min/max freq and power)"
	REVISION     "201801080000Z"
	DESCRIPTION  "revision 0.18 - Added crc history, network preference"	
	REVISION     "201709140000Z"
	DESCRIPTION  "revision 0.17 - Added manufacturing and tested date OIDs"
	REVISION     "201707250000Z"
	DESCRIPTION  "revision 0.16 - Added led blanking"
	REVISION     "201707060000Z"
	DESCRIPTION  "revision 0.15 - Added band selection to utilities and more parameters to spectrum analyzer"
	REVISION     "201706050000Z"
	DESCRIPTION  "revision 0.14 - Added backup/restore OIDs"
	REVISION     "201704250000Z"
	DESCRIPTION  "revision 0.13 - Added LTE modem phone and ip addr, added upgradeBspStatus oid"
	REVISION     "201703270000Z"
	DESCRIPTION  "revision 0.12 - Updated upgradableListTable, added HM fault and alarm notifications"
	REVISION     "201703170000Z"
	DESCRIPTION  "revision 0.11 - updated HM alarms and faults to use new API, old OIDs removed.
								    Added packet forwarder switching"
	REVISION     "201703080000Z"
	DESCRIPTION  "revision 0.10 - Added reading dbm to dbfs offset, 
									spectral scan antenna & timestamp,
									reading factory config.json, notifications"
	REVISION     "201702180000Z"
	DESCRIPTION  "revision 0.09 - Added wireless modem, sshkey"	
	REVISION     "201702010000Z"
	DESCRIPTION  "revision 0.08 - Added HM alarms and interrupt statistics"
	REVISION     "201701260000Z"
	DESCRIPTION  "revision 0.07 - Added firewall configuration support"
	REVISION     "201612160000Z"
	DESCRIPTION  "revision 0.06 - added GPS position, added spectrum analyzer"
	REVISION     "201612020000Z"
	DESCRIPTION  "revision 0.05 - Added Actility and modified spectral scan"
	REVISION     "201611250000Z"
	DESCRIPTION  "revision 0.04 - Added new OIDs"
	REVISION     "201611170000Z"
	DESCRIPTION  "revision 0.03 - Added new OIDs"
	REVISION     "201610310000Z"
	DESCRIPTION  "revision 0.02 - updated to HAL V2"
	REVISION     "201610010000Z"
	DESCRIPTION  "revision 0.01 - first version"

	::= { tekProducts 5 }
--=======================================================================================   
konaCompliance OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Kona Compliance branch"
    ::={tekExperimental 5} 

--=======================================================================================
konaComplianceGroup OBJECT-GROUP
    OBJECTS {
agentVersion
    }
    STATUS current
    DESCRIPTION
        "All objects used for radio functions"
        ::= { konaCompliance 1}
	

--=========================================================================================
--textual conventions
FailureReasonType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION     "Represents failure state and cause."           
    SYNTAX          INTEGER { none  (0), notSupported (1), invalidParameter (2), invalidState (3), radioFault (4), operationFailed(5)}

AlarmStatusType::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION     "Represents transaction status."            
    SYNTAX          INTEGER { clear(0), raised (1)}

LogConfigRotationType::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION     "Log rotation interval enumerated values"
    SYNTAX          INTEGER {    
    logrotateHourly  (0),
    logrotateDaily   (1),
    logrotateWeekly  (2),
    logrotateMonthly (3),
    logrotateYearly  (4)}
BoolType::= TEXTUAL-CONVENTION
	STATUS			current
	DESCRIPTION		"Convenient bool convention"
	SYNTAX			INTEGER {false(0), true (1)}
Float32TC ::= TEXTUAL-CONVENTION
      STATUS       current
      DESCRIPTION  "This type represents a 32-bit (4-octet) IEEE
                    floating-point number in binary interchange format."
      REFERENCE    "IEEE Standard for Floating-Point Arithmetic,
                    Standard 754-2008"
      SYNTAX       OCTET STRING (SIZE(4))	
--=========================================================================================
snmpAgentInfo OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "SNMP agent info"
    ::={kona 1}
agentVersion OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Returns the version of the SNMP agent"
    ::= {snmpAgentInfo 1}
supportedMibVersion OBJECT-TYPE
	SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Returns the expected version of the MIB to be used with this agent"
    ::= {snmpAgentInfo 2}

--=====================================================================================
deviceInfo OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Device information"
    ::={kona 2}	
moduleName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Module name "
    ::= {deviceInfo 1}
moduleProductCode OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Module product code"
    ::= {deviceInfo 2}
operatingBand OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Operating band"
    ::= {deviceInfo 3}	
moduleRevision OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Module revision"
    ::= {deviceInfo 4}
moduleSerialNumber OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Module serial number"
    ::= {deviceInfo 5}
pcbaMacAddress OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "PCBA MAC address"
    ::= {deviceInfo 6}	
custGatewayId OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Customer gateway EUI-64 address "
    ::= {deviceInfo 7}	
mfgYear OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Manufacturing year "
    ::= {deviceInfo 8}
mfgWeek OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Manufacturing week "
    ::= {deviceInfo 9}
testedYear OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Tested year "
    ::= {deviceInfo 10}
testedWeek OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Tested week "
    ::= {deviceInfo 11}
bspVersion OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Installed BSP version"
    ::= {deviceInfo 20}	
feFpgaVersion OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Installed FE FPGA version"
    ::= {deviceInfo 21}
gpioFpgaVersion OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Installed FE FPGA version"
    ::= {deviceInfo 22}	
radioProperties     OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Radio properties"
    ::={deviceInfo 49}
--radioProperties	
radioPropertiesRxLo OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"RX Lo frequency as reported in database"
	::={ radioProperties 1}
radioPropertiesRxMin OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"minimum RX frequency as reported in database"
	::={ radioProperties 2}
radioPropertiesRxMax OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"maximum RX frequency as reported in database"
	::={ radioProperties 3}
radioPropertiesTxLo  OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"TX Lo frequency as reported in database"
	::={ radioProperties 4}
radioPropertiesTxMin OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"minimum TX frequency as reported in database"
	::={ radioProperties 5}
radioPropertiesTxMax OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"maximum TX frequency as reported in database"
	::={ radioProperties 6}
radioPropertiesTxMinPower OBJECT-TYPE
	SYNTAX 			INTEGER
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"minimum permitted Tx power as reported in database"
	::={ radioProperties 7}	
radioPropertiesTxMaxPower OBJECT-TYPE
	SYNTAX 			INTEGER
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"maximum permitted Tx power as reported in database"
	::={ radioProperties 8}
radioPropertiesChipCount OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Number of SX1301s on the board"
	::={ radioProperties 20}	
--=====================================================================	
poePower OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Built-In Self Test (BIST) branch"
    ::={deviceInfo 50}	
poeDcAux OBJECT-TYPE
    SYNTAX          INTEGER { dcAuxConnected(0),  dcAuxDisconnected(1), unknown (2)}
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "DC Auxiliary power supply connected"
    ::= {poePower 1}		
poeT2P OBJECT-TYPE
    SYNTAX          INTEGER { poeNegotiationSuccess (0),  poeNotNegotiated(1), unknown (2)}
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "PoE Negotiation status"
    ::= {poePower 2}		
poeT4P OBJECT-TYPE
    SYNTAX          INTEGER { power-4pair(0),  power-2pair(1), unknown (2)}
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "4-pair power status, for proper PoE operation 4-pair power is required"
    ::= {poePower 3}		
--=====================================================================================
bistResult OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Built-In Self Test (BIST) branch"
    ::={kona 3}

bistResultCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of table entries"
    ::= {bistResult 3}
    
bistResultTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF BistResultCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Built-In Self Test table"
    ::= {bistResult 4}
bistResultEntry OBJECT-TYPE
    SYNTAX          BistResultCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table entry"
    INDEX           {bistResultTableIndex}
    ::= {bistResultTable 1}
BistResultCellType ::= 
    SEQUENCE {
        bistResultTableIndex         Unsigned32,
        bistResultModule             DisplayString,
        bistResultName               DisplayString,      
        bistResultPassed             INTEGER     
}
bistResultTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {bistResultEntry 1}
bistResultModule OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "BIST test module name"
    ::= {bistResultEntry 2}  
bistResultName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "BIST test name - What is the test that we're performing on the module"
    ::= {bistResultEntry 3}  
bistResultPassed OBJECT-TYPE
    SYNTAX          INTEGER {failed (0), passed (1)}
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Test results"
    ::= {bistResultEntry 4}  
bistResultFailureReason OBJECT-TYPE
    SYNTAX          FailureReasonType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Failure reason, if any"
    ::={ bistResult 5}	
	
--===================================================================================================
--================================== Alarm Branches ==============
hmAlarmsFaultsAndIntStatistics OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Alarms, faults and interrupt statistics branch"
    ::= {kona 4}
hmAlarms OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Current state of alarms"
    ::={hmAlarmsFaultsAndIntStatistics 1}
hmFaults OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Current state of alarms"
    ::={hmAlarmsFaultsAndIntStatistics 2}   
hmInterruptStatistics OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Alarm Statistics branch"
    ::={hmAlarmsFaultsAndIntStatistics 3}
hmSimulateFaults OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Simulation branch - asserts fault regardless of HW state"
    ::={hmAlarmsFaultsAndIntStatistics 4}
--============ End of Branch definition==============
--============================get status OIDs
hmAlarmCurrentStateCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of items in table"
    ::= {hmAlarms 2}   
    
hmAlarmCurrentStateTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF HmAlarmCurrentStateCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Software versions table"
    ::= {hmAlarms 3}
hmAlarmCurrentStateEntry OBJECT-TYPE
    SYNTAX          HmAlarmCurrentStateCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {hmAlarmCurrentStateTableIndex}
    ::= {hmAlarmCurrentStateTable 1}
HmAlarmCurrentStateCellType ::= 
    SEQUENCE {
        hmAlarmCurrentStateTableIndex     Unsigned32,
        hmAlarmCurrentStateId             Unsigned32,
        hmAlarmCurrentStateSeverity       INTEGER,
        hmAlarmCurrentStateState          Unsigned32
}
hmAlarmCurrentStateTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {hmAlarmCurrentStateEntry 1}
hmAlarmCurrentStateId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Alarm ID"
    ::= {hmAlarmCurrentStateEntry 2}  
    
hmAlarmCurrentStateSeverity OBJECT-TYPE
    SYNTAX          INTEGER { critical(0), major (1), minor (2)}
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Alarm Severity"
    ::= {hmAlarmCurrentStateEntry 3}
hmAlarmCurrentStateState OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Alarm State"
    ::= {hmAlarmCurrentStateEntry 4}  
	
hmAlarmConfig OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Alarm Configuration branch"
    ::={hmAlarms 4} 
hmAlarmConfigId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Alarm ID to disable/enable indications for"
    ::= {hmAlarmConfig 1}  
hmAlarmConfigEnabled OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable indications for the alarmId listed above."
    ::= {hmAlarmConfig 2}	
hmAlarmConfigExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Write the alarm configuration by writing (1000001) to this OID"
    ::= {hmAlarmConfig 100}		
hmAlarmDescription OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Alarm Descriptions branch"
    ::={hmAlarms 5} 
--==========================================
hmAlarmDescriptionId OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS		read-write
	STATUS			current
	DESCRIPTION		"Set the alarm ID to get a textual description of the alarm"
::= {hmAlarmDescription 1}
hmAlarmDescriptionText OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Text description of the alarm"
::= {hmAlarmDescription 2}
hmAlarmDescriptionEnabled OBJECT-TYPE
	SYNTAX          BoolType
	MAX-ACCESS		read-only
	STATUS			current
	DESCRIPTION		"Indicates whether or not the alarm will cause an indication to be sent out"
::= {hmAlarmDescription 3}

	
--================================== faults
hmFaultCurrentStateCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of items in table"
    ::= {hmFaults 2}   
    
hmFaultCurrentStateTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF HmFaultCurrentStateCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Software versions table"
    ::= {hmFaults 3}
hmFaultCurrentStateEntry OBJECT-TYPE
    SYNTAX          HmFaultCurrentStateCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {hmFaultCurrentStateTableIndex}
    ::= {hmFaultCurrentStateTable 1}
HmFaultCurrentStateCellType ::= 
    SEQUENCE {
        hmFaultCurrentStateTableIndex     Unsigned32,
        hmFaultCurrentStateId             Unsigned32,
        hmFaultCurrentStateSeverity       INTEGER,
        hmFaultCurrentStateState          Unsigned32
}
hmFaultCurrentStateTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {hmFaultCurrentStateEntry 1}
hmFaultCurrentStateId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Fault ID"
    ::= {hmFaultCurrentStateEntry 2}  
    
hmFaultCurrentStateSeverity OBJECT-TYPE
    SYNTAX          INTEGER { critical(0), major (1), minor (2)}
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Fault Severity"
    ::= {hmFaultCurrentStateEntry 3}
hmFaultCurrentStateState OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Fault State"
    ::= {hmFaultCurrentStateEntry 4}  
	
hmFaultConfig OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Fault Configuration branch"
    ::={hmFaults 4} 
hmFaultConfigId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Fault ID to disable/enable indications for"
    ::= {hmFaultConfig 1}  
hmFaultConfigEnabled OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable indications for the FaultId listed above."
    ::= {hmFaultConfig 2}	
hmFaultConfigExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Write the Fault configuration by writing (1000001) to this OID"
    ::= {hmFaultConfig 100}	
hmFaultDescription OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Fault Descriptions branch"
    ::={hmFaults 5}	
hmFaultDescriptionId OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS		read-write
	STATUS			current
	DESCRIPTION		"Set the Fault ID to get a textual description of the Fault"
::= {hmFaultDescription 1}
hmFaultDescriptionText OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Text description of the Fault"
::= {hmFaultDescription 2}	
hmFaultDescriptionEnabled OBJECT-TYPE
	SYNTAX          BoolType
	MAX-ACCESS		read-only
	STATUS			current
	DESCRIPTION		"Indicates whether or not the fault will cause an indication to be sent out"
::= {hmFaultDescription 3}
--================================interrupt stats   
hmInterruptStatisticsCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of table entries"
    ::= {hmInterruptStatistics 2}
    
hmInterruptStatisticsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF HmInterruptStatisticsCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Software versions table"
    ::= {hmInterruptStatistics 3}
hmInterruptStatisticsEntry OBJECT-TYPE
    SYNTAX          HmInterruptStatisticsCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {hmInterruptStatisticsTableIndex}
    ::= {hmInterruptStatisticsTable 1}
HmInterruptStatisticsCellType ::= 
    SEQUENCE {
        hmInterruptStatisticsTableIndex Unsigned32,     
        hmInterruptStatisticsId         Unsigned32,
        hmInterruptStatisticsName       DisplayString,
        hmInterruptStatisticsCounter    Unsigned32
}
hmInterruptStatisticsTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {hmInterruptStatisticsEntry 1}
hmInterruptStatisticsId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Interrupt ID"
    ::= {hmInterruptStatisticsEntry 2}
hmInterruptStatisticsName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Interrupt name"
    ::= {hmInterruptStatisticsEntry 3}  
    
hmInterruptStatisticsCounter OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Interrupt fired counter"
    ::= {hmInterruptStatisticsEntry 4}  
--=========================================
hmSimulateFaultsId OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Fault ID to simulate"
    ::= {hmSimulateFaults 1} 
	
hmSimulateFaultsState OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "state of the fault"
    ::= {hmSimulateFaults 2}  
hmSimulateFaultsExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Set the state of the fault"
    ::= {hmSimulateFaults 100} 	
--=====================================================================
--==========================================
performance OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Performance branch"
    ::={kona 5}
perfCpu OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Storage branch"
    ::={performance 1}
perfMemory 			OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Storage branch"
    ::={performance 2}	
perfStorage OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Storage branch"
    ::={performance 3}
--==================CPU
perfCpuThreshold OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Cpu Utilization threshold. Notification sent out when utilization exceeds threshold"
    ::= {perfCpu 4} 
--==================Memory
perfMemoryThreshold OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Memory Utilization threshold. Notification sent out when available memory falls below threshold"
    ::= {perfMemory 4} 	
--==================Storage

perfStorageCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of table entries"
    ::= {perfStorage 1}
    
perfStorageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF StorageCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Storage table"
    ::= {perfStorage 2}
perfStorageEntry OBJECT-TYPE
    SYNTAX          StorageCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table entry"
    INDEX           {perfStorageTableIndex}
    ::= {perfStorageTable 1}
StorageCellType ::= 
    SEQUENCE {
        perfStorageTableIndex     Unsigned32,
        perfStorageId             DisplayString,
        perfStorageUsed           Unsigned32,
        perfStorageTotal          Unsigned32      
}
perfStorageTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {perfStorageEntry 1}
perfStorageId OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Name of storage device"
    ::= {perfStorageEntry 2}  
perfStorageUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Total used Storage"
    ::= {perfStorageEntry 3}  
perfStorageTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Total Storage available"
    ::= {perfStorageEntry 4}  
perfStorageThreshold OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Storage Utilization threshold. Notification sent out when storage falls below threshold"
    ::= {perfStorage 3} 	
	
	
--==========================================Sensors branch
sensors OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Key Sensor data branch"
    ::={kona 6}

temperatureSensors OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Temperature Sensor data branch"
    ::={sensors 1}
   
enclosureTemperature OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Temperature in degrees Celsius"
    ::= {temperatureSensors 1}
    
tempThreshold OBJECT-TYPE
    SYNTAX          Integer32 (0..99)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Temperature threshold in degrees Celsius. 
	                 A notification shall be sent out when temperature exceeds threshold"
    ::= {temperatureSensors 2}
--=======================================================================================
gpsPosition OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Voltage Sensor data branch"
    ::={sensors 2}
   
gpsLatitude OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "GPS Latitude"
    ::= {gpsPosition 1}
gpsLongitude OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "GPS Longitude"
    ::= {gpsPosition 2}
gpsAltitude OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "GPS Altitude"
    ::= {gpsPosition 3}    
--==========================================================================================
swManagement OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Software management branch"
    ::={kona 7}
currentPartition OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Partition the system is running on"
    ::= {swManagement 1}	
--=====================================
swVersion OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Software versions branch"
    ::={swManagement 2}
swVerType OBJECT-TYPE
    SYNTAX          Integer32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Status of request to retrieve SW versions, set to 1 for full list or set to 0 for short list"
    ::= {swVersion 1}
swVerFailureReason OBJECT-TYPE
    SYNTAX          FailureReasonType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Failure reason, if any"
    ::={ swVersion 2}

swVerCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of table entries"
    ::= {swVersion 4}
    
swVerTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SwVerCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Software versions table"
    ::= {swVersion 5}
swVerEntry OBJECT-TYPE
    SYNTAX          SwVerCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {swVerTableIndex}
    ::= {swVerTable 1}
SwVerCellType ::= 
    SEQUENCE {
        swVerTableIndex          Unsigned32,
        swVerComponentName       DisplayString,
        swVerComponentVer        DisplayString       
}
swVerTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..4294967295)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {swVerEntry 1}
swVerComponentName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Component name"
    ::= {swVerEntry 2}   
swVerComponentVer OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Component version"
    ::= {swVerEntry 3}   

--======================================upgrading
swUpgrade OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Software upgrade branch"
    ::={swManagement 3}
upgradeServers OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Opkg server list branch"
    ::={swUpgrade 3}
upgradeListUpgradable OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Opkg upgradable packages list branch"
    ::={swUpgrade 4}
installableSwList OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Opkg upgradable packages list branch"
    ::={swUpgrade 5}		
--==========================================================
upgradeServerListStatus OBJECT-TYPE
    SYNTAX          INTEGER {success (0),fail(1), readTable (100), commitChanges(101)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Status OID, reports status of last operation, set to 100 to update table, set to 101 to commit changes.
						Remove a single row by writing a blank '' string to each of the three entries and committing the changes"
    ::={ upgradeServers 1}		
    
upgradeServerListTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF UpgradeServerListCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Server table"
    ::= {upgradeServers 4}
upgradeServerListEntry OBJECT-TYPE
    SYNTAX          UpgradeServerListCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {upgradeServerListTableIndex}
    ::= {upgradeServerListTable 1}
UpgradeServerListCellType ::= 
    SEQUENCE {
        upgradeServerListTableIndex            Unsigned32,
        upgradeServerListType         DisplayString,
        upgradeServerListName         DisplayString,
		upgradeServerListAddress      DisplayString,
		upgradeServerUserName         DisplayString,
		upgradeServerPassword		  DisplayString
}
upgradeServerListTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {upgradeServerListEntry 1}
upgradeServerListType OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "opkg server type, typically 'src/gz'"
    ::= {upgradeServerListEntry 2} 
upgradeServerListName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "name of the server, any arbitrary name will do"
    ::= {upgradeServerListEntry 3} 
upgradeServerListAddress OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "address of the server, including path"
    ::= {upgradeServerListEntry 4} 	
upgradeServerUserName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Username for opkg server, leave blank when not used"
    ::= {upgradeServerListEntry 5} 		
upgradeServerPassword OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Write-only. Password for opkg server, leave blank when not used"
    ::= {upgradeServerListEntry 6} 		
--==========================================================
	
upgradableListCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of table entries"
    ::= {upgradeListUpgradable 1}
    
upgradableListTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF UpgradableListCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table of upgradable packages"
    ::= {upgradeListUpgradable 2}
upgradableListEntry OBJECT-TYPE
    SYNTAX          UpgradableListCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {upgradableListTableIndex}
    ::= {upgradableListTable 1}
UpgradableListCellType ::= 
    SEQUENCE {
        upgradableListTableIndex            Unsigned32,
        upgradableListComponentName         DisplayString,
        upgradableListComponentOldVersion   DisplayString,
		upgradableListComponentNewVersion   DisplayString,
		upgradableListComponentSpecial      INTEGER
}
upgradableListTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {upgradableListEntry 1}
upgradableListComponentName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Component name"
    ::= {upgradableListEntry 2} 
upgradableListComponentOldVersion OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Currently installed version"
    ::= {upgradableListEntry 3} 
upgradableListComponentNewVersion OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "New version available"
    ::= {upgradableListEntry 4}
upgradableListComponentSpecial OBJECT-TYPE  
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "0 for normal packages, non-zero means special handling required for this package, 
					see package documentation"
    ::= {upgradableListEntry 5}
	
packageToUpgrade OBJECT-TYPE
    SYNTAX          DisplayString 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Select the package to install/upgrade or set to 'all' to install/upgrade all available packages"
    ::= {upgradeListUpgradable 100}
upgradeStart OBJECT-TYPE
    SYNTAX          INTEGER {success (0), 
       couldNotSetDefaultDestination (1),
       errorParsingConfigFile (2),
       couldNotCreateTemporaryDirectory (3),
	   couldNotObtainAdministrativeLock (4),
	   unsatisfiedDependencies (5),
	   isEssential (6),
	   hasDependents (7),
	   hasNoCandidate (8),
	   packageHasNoAvailableArchitecture (9),
	   notTrusted (10),
	   downloadError (11),
	   conflicts (12),
	   alreadyInstalled (13),
	   dependencies (14),
	   noDowngrade (15),
	   outOfSpace (16),
	   badSignature (17),
	   mD5Error (18),
	   internalError (19),
	   unknownError (65280),
	   ttUpgradeBusy (90000),    
	   ttBspUpgradeBusy (90001),
	   ttBspStatusNeverPerformed (90002),
	   ttBspLatest (90003),
	   ttBspUpgradeError (90004),
	   ttGeneralUpgradeFailure (90005),
	   startUpgrade(1000001)
	   } 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Writing 1000001 to this OID starts the upgrade procedure for all available/selected packages.					
					Operator shall check for upgradable packages and keep upgrading until no upgradable 
					packages are listed. The upgrade should complete in 1 or 2 upgrade requests."
    ::= {upgradeListUpgradable 101}
upgradeFailureReason OBJECT-TYPE
    SYNTAX          FailureReasonType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Failure reason, read this OID if any of the server list operations fail."
    ::={ upgradeListUpgradable 102}
upgradeBspStatus OBJECT-TYPE
    SYNTAX          INTEGER {success (0),
						   generalError (1),
						   upgradeBusy (90000),    
						   bspUpgradeBusy (90001),
						   bspStatusNeverPerformed (90002),
						   bspLatest (90003),
						   bspUpgradeError (90004),
						   breakLock(1000001)
						   } 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "read this OID to get bsp upgrade status"
    ::= {upgradeListUpgradable 103}	
--==========================================================
	
installableSwListCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of table entries"
    ::= {installableSwList 1}
    
installableSwListTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF InstallableSwListCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table of installable packages"
    ::= {installableSwList 2}
installableSwListEntry OBJECT-TYPE
    SYNTAX          InstallableSwListCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {installableSwListTableIndex}
    ::= {installableSwListTable 1}
InstallableSwListCellType ::= 
    SEQUENCE {
        installableSwListTableIndex            Unsigned32,
        installableSwListComponentName         DisplayString,
        installableSwListComponentVersion   DisplayString
}
installableSwListTableIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {installableSwListEntry 1}
installableSwListComponentName OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Component name"
    ::= {installableSwListEntry 2} 
installableSwListComponentVersion OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Currently installed version"
    ::= {installableSwListEntry 3} 

packageToInstall OBJECT-TYPE
    SYNTAX          DisplayString 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Select the package to install/upgrade or set to 'all' to install/upgrade all available packages"
    ::= {installableSwList 100}
installStart OBJECT-TYPE
    SYNTAX          INTEGER {success (0), 
	                        couldNotSetDefaultDestination (1),
       errorParsingConfigFile (2),
       couldNotCreateTemporaryDirectory (3),
	   couldNotObtainAdministrativeLock (4),
	   unsatisfiedDependencies (5),
	   isEssential (6),
	   hasDependents (7),
	   hasNoCandidate (8),
	   packageHasNoAvailableArchitecture (9),
	   notTrusted (10),
	   downloadError (11),
	   conflicts (12),
	   alreadyInstalled (13),
	   dependencies (14),
	   noDowngrade (15),
	   outOfSpace (16),
	   badSignature (17),
	   mD5Error (18),
	   internalError (19),
	   unknownError (65280),
	   ttInstallBusy (90000),    	   
	   ttGeneralInstallFailure (90005),	   
	   startInstall(1000001)} 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Writing 1000001 to this OID starts the install procedure for all available/selected packages.					
					Operator shall check for upgradable packages and keep upgrading until no upgradable 
					packages are listed. The install should complete in 1 or 2 requests."
    ::= {installableSwList 101}
installFailureReason OBJECT-TYPE
    SYNTAX          FailureReasonType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Failure reason, read this OID if any of the server list operations fail."
    ::={ installableSwList 102}		
	
--=============================================================================================
swBackupAndRestore OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "system backup branch"
    ::={swManagement 4}
--=========================	
swBakResStatus OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     ""
    ::= {swBackupAndRestore 1} 	
--=========================
swBackup OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "system backup branch"
    ::={swBackupAndRestore 2}
swBackupDescription OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enter a description for the backup. Or leave blank."
    ::= {swBackup 1} 
swBackupExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {swBackup 100} 	
--=======================================
swRestore OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "system backup branch"
    ::={swBackupAndRestore 3}	
swRestorePointsCount OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Count of available restore points"
    ::= {swRestore 1}
swRestorePointsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF REPLACE
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table of available restore points"
    ::= {swRestore 2}
swRestorePointsEntry OBJECT-TYPE
    SYNTAX          REPLACE
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one table cell"
    INDEX           {swRestorePointIndex}
    ::= {swRestorePointsTable 1}
REPLACE ::= 
    SEQUENCE {
        swRestorePointIndex            Unsigned32,
        swRestorePointDescription      DisplayString,
        swRestorePointDate             DisplayString
}
swRestorePointIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Table Index"
    ::= {swRestorePointsEntry 1}
swRestorePointDescription OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Description of the backup"
    ::= {swRestorePointsEntry 2} 
swRestorePointDate OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "System date when the backup was performed"
    ::= {swRestorePointsEntry 3} 	
	
swRestorePointSelected OBJECT-TYPE
    SYNTAX          Unsigned32 (1..30)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Select the restore point to restore to"
    ::= {swRestore 3} 
swRestorePointExecute OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "To restore selected backup write (1000001) to this OID, to delete selected backup write (1000002)"
    ::= {swRestore 100} 	
--==========================================================================================
logging OBJECT-IDENTITY 
    STATUS          current
    DESCRIPTION     "logging branch"
    ::= {kona 8}

logConfig OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Log configuration branch"
    ::={logging 1}
    
logConfigRotation OBJECT-TYPE
    SYNTAX          LogConfigRotationType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Log rotation frequency"
    ::= {logConfig 1} 

logConfigRotationDepth OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Number of log files to keep before overwriting old log files"
    ::= {logConfig 2} 
logConfigMaxSize OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Maximum size of log file before it is rotated"
    ::= {logConfig 3} 
logKernelLevel OBJECT-TYPE
    SYNTAX          Unsigned32 (1..8)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Kernel logging level, only messages with a log level LOWER than this will be printed.
					 Kernel constant   Level value   Meaning
					 KERN_EMERG             0        System is unusable
                     KERN_ALERT             1        Action must be taken immediately
                     KERN_CRIT              2        Critical conditions
                     KERN_ERR               3        Error conditions
                     KERN_WARNING           4        Warning conditions
                     KERN_NOTICE            5        Normal but significant condition
                     KERN_INFO              6        Informational
                     KERN_DEBUG             7        Debug-level messages"
    ::= {logConfig 4} 
    
--=====================================================================
radio OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Radio branch"
    ::={kona 9}
radioStatistics OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "radio statistics"
    ::={radio 1}
radioLastTxPacketInfo OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Last transmitted packet details"
    ::={radio 2}
radioLastRxPacketInfo OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Last receiveded packet details"
    ::={radio 3}	
radioRxDbfsToDbmOffset OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Calibrated offset from dBFS to dBm"
    ::={radio 4}		
radioLoraCrcHistory OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Historical packet receive statistics"
    ::={radio 5}		
radioLoraChannelMap OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "channel number to frequency mapping"
    ::={radio 6}
--==============================================
radioStatisticsResetCounters OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Set to 1000001 to clear the counters"
    ::= {radioStatistics 1}
radioStatisticsNumTxPackets OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of transmitted packets since last reset"
    ::= {radioStatistics 2} 	
radioStatisticsNumRxPackets OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of received packets since last reset"
    ::= {radioStatistics 3} 	
radioStatisticsRxCrcOkPackets OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of received packets that passed CRC check"
    ::= {radioStatistics 4} 
radioStatisticsRxCrcErrPackets OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of received packets that failed CRC check"
    ::= {radioStatistics 5} 
radioStatisticsRxFineTimestamp OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of received packets with fine timestamp"
    ::= {radioStatistics 6} 
radioStatisticsRxNoFineTimestamp OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of received packets without fine timestamp"
    ::= {radioStatistics 7} 
radioStatisticsNoMatch OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of received packets that do not match"
    ::= {radioStatistics 8} 
--=====================================================================	
radioLastTxFrequency OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet transmitted - frequency"
    ::= {radioLastTxPacketInfo 1}	

radioLastTxSf OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet transmitted - spreading factor"
    ::= {radioLastTxPacketInfo 2}	

radioLastTxBw OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet transmitted - bandwidth"
    ::= {radioLastTxPacketInfo 3}	
	
radioLastTxSnr OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet transmitted - Signal to Noise Ratio"
    ::= {radioLastTxPacketInfo 4}	
	
radioLastTxPower OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet transmitted - Power level"
    ::= {radioLastTxPacketInfo 5}	
	
radioLastTxTimeStamp OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet transmitted - timestamp"
    ::= {radioLastTxPacketInfo 6}	
--=====================================================================	
radioLastRxFrequency OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet received - frequency"
    ::= {radioLastRxPacketInfo 1}	

radioLastRxSf OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet received - spreading factor"
    ::= {radioLastRxPacketInfo 2}	

radioLastRxBw OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet received - bandwidth"
    ::= {radioLastRxPacketInfo 3}	
	
radioLastRxSnr OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet received - Signal to Noise Ratio"
    ::= {radioLastRxPacketInfo 4}	
	
radioLastRxPower OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet received - Power level"
    ::= {radioLastRxPacketInfo 5}	
	
radioLastRxTimeStamp OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Last packet received - timestamp"
    ::= {radioLastRxPacketInfo 6}	
--=====================================================================	
radioRxDbfsToDbmAnt0 OBJECT-TYPE
    SYNTAX          Float32TC
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Antenna 0 offset"
    ::= {radioRxDbfsToDbmOffset 1}	
radioRxDbfsToDbmAnt1 OBJECT-TYPE
    SYNTAX          Float32TC
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Antenna 1 offset"
    ::= {radioRxDbfsToDbmOffset 2}		
--====================================================================

radioLoraCrcHistoryDaily  OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Per day receive packet statistics"
    ::={radioLoraCrcHistory 1}	

radioLoraCrcHistoryDailyBlob OBJECT-TYPE
	SYNTAX 			OCTET STRING
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"hourly statistic reports all 64 channels * 24 hours in one read"
	::={ radioLoraCrcHistoryDaily 1} 
		
radioLoraCrcHistoryDailyTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF RadioLoraCrcHistoryTableTypeDay
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"Receive packet statistics table - Hourly totals"
	::= {radioLoraCrcHistoryDaily 2}
	
radioLoraCrcHistoryDailyTableEntry OBJECT-TYPE
	SYNTAX			RadioLoraCrcHistoryTableTypeDay
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"Receive packet statistics table entry"
	INDEX			{radioLoraCrcHistoryDailyTableIndex}
	::= {radioLoraCrcHistoryDailyTable 1}
		
RadioLoraCrcHistoryTableTypeDay ::= 
	SEQUENCE {
		radioLoraCrcHistoryDailyTableIndex		Unsigned32,
		radioLoraCrcHistoryDailyTableGoodCrc     	Unsigned32,
		radioLoraCrcHistoryDailyTableBadCrc      	Unsigned32
}

radioLoraCrcHistoryDailyTableIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for the table"
	::= {radioLoraCrcHistoryDailyTableEntry 1}
radioLoraCrcHistoryDailyTableGoodCrc OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Good CRC packets received"
	::={ radioLoraCrcHistoryDailyTableEntry 2}
radioLoraCrcHistoryDailyTableBadCrc OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Bad CRC packets received"
	::={ radioLoraCrcHistoryDailyTableEntry 3}	
--================================	
radioLoraCrcHistoryHr  OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Per hour receive packet statistics"
    ::={radioLoraCrcHistory 2}	
radioLoraCrcHistoryHrBlob OBJECT-TYPE
	SYNTAX 			OCTET STRING
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Daily statistic reports all 64 channels * 31 days in one read"
	::={ radioLoraCrcHistoryHr 1} 
radioLoraCrcHistoryHrTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF RadioLoraCrcHistoryHrTableType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"Receive packet statistics table"
	::= {radioLoraCrcHistoryHr 2}		
	
radioLoraCrcHistoryHrTableEntry OBJECT-TYPE
	SYNTAX			RadioLoraCrcHistoryHrTableType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"Receive packet statistics table entry"
	INDEX			{radioLoraCrcHistoryHrTableIndex}
	::= {radioLoraCrcHistoryHrTable 1}
	
RadioLoraCrcHistoryHrTableType ::= 
	SEQUENCE {
		radioLoraCrcHistoryHrTableIndex			Unsigned32,
		radioLoraCrcHistoryHrTableGoodCrc     	Unsigned32,
		radioLoraCrcHistoryHrTableBadCrc      	Unsigned32
}
radioLoraCrcHistoryHrTableIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for the table"
	::= {radioLoraCrcHistoryHrTableEntry 1}
radioLoraCrcHistoryHrTableGoodCrc OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Good CRC packets received"
	::={ radioLoraCrcHistoryHrTableEntry 2}
radioLoraCrcHistoryHrTableBadCrc OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Bad CRC packets received"
	::={ radioLoraCrcHistoryHrTableEntry 3}
--=====================================================================
radioLoraChannelMappingBlob OBJECT-TYPE
	SYNTAX 			OCTET STRING
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Channel-frequency map array read in one shot. uint32_t channel, uint32_t freqKhz, uint32_t bandwidth"
	::={ radioLoraChannelMap 1} 
--=====================================================================

utilities OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Utilities branch"
    ::={kona 10}	
	--=============================================
utilTxContinuous OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "txContinuous utility branch"
    ::={utilities 1}	
utilTxContFrequency OBJECT-TYPE
    SYNTAX          Unsigned32 (800000..1000000)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Tx RF frequency in kHz, Valid range 800,000:1,000,000 kHz"
    ::= {utilTxContinuous 1}
utilTxContRfChain	OBJECT-TYPE
    SYNTAX          Unsigned32 (0..1)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Transmit chain to use"
    ::= {utilTxContinuous 2}	
utilTxContPower	OBJECT-TYPE
    SYNTAX          Unsigned32 (0..30)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Transmit power table index"
    ::= {utilTxContinuous 3}	
utilTxContBandType	OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Transmit band. Currently supported: ['US915', 'EU868', 'US_FULL_ISM']"
    ::= {utilTxContinuous 4}		
utilTxContModType OBJECT-TYPE
    SYNTAX          INTEGER {lora(0), fsk (1), cw(2)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Modulation type, {'LORA','FSK','CW'}, 'CW':unmodulated carrier"
    ::= {utilTxContinuous 6}	
utilTxContLoraSpreadingFactor OBJECT-TYPE
    SYNTAX          Unsigned32 (7..12)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "LoRa Spreading Factor, Valid range: [7:12]"
    ::= {utilTxContinuous 7}	
utilTxContLoraBandwidth OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "LoRa bandwidth in kHz. Valid range: [125,250,500]"
    ::= {utilTxContinuous 8}			
utilTxContFskBitrate OBJECT-TYPE
    SYNTAX          Unsigned32 (500..250000)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "FSK bitrate in bps. Valid Range: [500:250000] "
    ::= {utilTxContinuous 9}	
utilTxContFskFreqDeviation OBJECT-TYPE
    SYNTAX          Unsigned32 (1..250)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "FSK frequency deviation in kHz. Valid Range: [1:250] "
    ::= {utilTxContinuous 10}	
utilTxContFskBtCoefficient OBJECT-TYPE
    SYNTAX          Unsigned32 (0..3)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "FSK BT coefficient of gaussion filter. Valid Range: [0:3] "
    ::= {utilTxContinuous 11}	
	
utilTxContinuousExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {utilTxContinuous 100}	
	--=============================================
utilPktLogger 			OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "pkt_logger utility branch"
    ::={utilities 2}	
utilPktLoggerConfig OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Optional. Path to a custom configuration. Leave blank to use config.json"
    ::= {utilPktLogger 1}	
utilPktLoggerOutput	OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "pkt_logger utility branch"
    ::={utilPktLogger 2}

utilPktLoggerFilesAvailableTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF UtilPktLoggerFilesAvailableType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"list of files generated by the packet logger"
	::= {utilPktLoggerOutput 1}

utilPktLoggerFilesAvailableEntry OBJECT-TYPE
	SYNTAX			UtilPktLoggerFilesAvailableType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"single file name"
	INDEX			{utilPktLoggerFilesAvailableIndex}
	::= {utilPktLoggerFilesAvailableTable 1}

UtilPktLoggerFilesAvailableType ::= 
	SEQUENCE {
		utilPktLoggerFilesAvailableIndex			Unsigned32,
		utilPktLoggerFilesAvailableFileName     	DisplayString
}

utilPktLoggerFilesAvailableIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for available files"
	::= {utilPktLoggerFilesAvailableEntry 1}
utilPktLoggerFilesAvailableFileName OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Available file"
	::={ utilPktLoggerFilesAvailableEntry 2}
utilPktLoggerFileSelect OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Select the pktlogger file to access"
    ::= {utilPktLoggerOutput 2}
	
utilPktLoggerResultsTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF UtilPktLoggerResultsType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"Packet logger results"
	::= {utilPktLoggerOutput 3}

utilPktLoggerResultsEntry OBJECT-TYPE
	SYNTAX			UtilPktLoggerResultsType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"Packet logger results, entry"
	INDEX			{utilPktLoggerResultsIndex}
	::= {utilPktLoggerResultsTable 1}

UtilPktLoggerResultsType ::= 
	SEQUENCE {
		utilPktLoggerResultsIndex			Unsigned32,
		utilPktLoggerResultsData     	DisplayString
}

utilPktLoggerResultsIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for the table"
	::= {utilPktLoggerResultsEntry 1}
utilPktLoggerResultsData OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"returns single line from the file selected, the 1st line is comma separated header, 
					lines 2 and above are comma separated results"
	::={ utilPktLoggerResultsEntry 2}

utilPktLoggerDeleteFile OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Setting this OID to 1000001 deletes the file named in utilPktLoggerFileSelect OID"
    ::= {utilPktLoggerOutput 4}	

	
utilPktLoggerExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID
					To abort the function write 1000004"
    ::= {utilPktLogger 100}		
	--=============================================
utilActPktForwarder		OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Packet Forwarder utility branch"
    ::={utilities 3}
utilActPktForwarderExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {utilActPktForwarder 100}	
	--===========================================
utilSendPkt 			OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "sendPkt utility branch"
    ::={utilities 4}	
utilSendPktFrequency OBJECT-TYPE
    SYNTAX          Unsigned32 (800000..1000000)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Tx RF frequency in kHz, Valid range 800,000:1,000,000 kHz"
    ::= {utilSendPkt 1}	
utilSendPktChanJump OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "number of channels to jump"
    ::= {utilSendPkt 2}	
utilSendPktChanOffset OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "explicit offset in kHz between channels"
    ::= {utilSendPkt 3}	
utilSendPktLoraBandwidth OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "LoRa bandwidth in kHz. Valid range: [125,250,500]"
    ::= {utilSendPkt 4}
utilSendPktLoraSpreadingFactor OBJECT-TYPE
    SYNTAX          Unsigned32 (7..12)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "LoRa Spreading Factor, Valid range: [7:12]"
    ::= {utilSendPkt 5}
utilSendPktLoraCodingRate OBJECT-TYPE
    SYNTAX          Unsigned32 (1..4)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "LoRa Spreading Factor, Valid range: [7:12]"
    ::= {utilSendPkt 6}		
utilSendPktLoraRfPower OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "RF Power (dBm)"
    ::= {utilSendPkt 7}
utilSendPktLoraPreambleLength OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "LoRa preamble length (symbols, 0 for default)"
    ::= {utilSendPkt 8}
utilSendPktLoraPayloadSize OBJECT-TYPE
    SYNTAX          Unsigned32 (0..256)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "payload size (bytes, <256)"
    ::= {utilSendPkt 9}
utilSendPktLoraPause OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "pause between packets (ms)"
    ::= {utilSendPkt 10}
utilSendPktLoraRepeatCount OBJECT-TYPE
    SYNTAX          Integer32 (-1..1000000)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "number of times the sequence is repeated (-1 loop until stopped)"
    ::= {utilSendPkt 11}
utilSendPktLoraInvertPolarity OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "send packet using inverted modulation polarity"
    ::= {utilSendPkt 12}
utilSendPktLoraPublicNetworkMode OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "configure the board in LoRa MAC *public network* mode"
    ::= {utilSendPkt 13}
utilSendPktLoraPacketTimestamp OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Setup the timestamp (in ms, must be greater than 2ms) for packet to transmit"
    ::= {utilSendPkt 14}	
utilSendPktBandType	OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Transmit band. Currently supported: ['US915', 'EU868', 'US_FULL_ISM']"
    ::= {utilSendPkt 15}		
utilSendPktExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {utilSendPkt 100}		
	--=============================================
utilSpectralScan		OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "spectralScan utility branch"
    ::={utilities 5}
utilSpectralScanAntenna OBJECT-TYPE
    SYNTAX          Unsigned32  (0..1)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Antenna selection"
    ::= {utilSpectralScan 1}
utilSpectralScanSamplePeriod OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "time to wait between samples (max 6ms)"
    ::= {utilSpectralScan 2}
utilSpectralScanProgress OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Progress of spectral scan"
    ::= {utilSpectralScan 3}
utilSpectralScanChannelTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF UtilSpectralScanChannelType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"Spectral Scan results table"
	::= {utilSpectralScan 4}

utilSpectralScanChannelEntry OBJECT-TYPE
	SYNTAX			UtilSpectralScanChannelType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"Spectral Scan channel entry"
	INDEX			{utilSpectralScanChannelIndex}
	::= {utilSpectralScanChannelTable 1}

UtilSpectralScanChannelType ::= 
	SEQUENCE {
		utilSpectralScanChannelIndex			Unsigned32		
}

utilSpectralScanChannelIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for the table"
	::= {utilSpectralScanChannelEntry 1}
	
utilSpectralScanChannelResultsTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF UtilSpectralScanChannelResultsType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"Spectral Scan results table"
	::= {utilSpectralScan 5}	
	
utilSpectralScanChannelResultsEntry OBJECT-TYPE
	SYNTAX			UtilSpectralScanChannelResultsType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"Spectral Scan channel entry"
	INDEX			{utilSpectralScanChannelIndex, utilSpectralScanChannelResultsIndex}
	::= {utilSpectralScanChannelResultsTable 1}

UtilSpectralScanChannelResultsType ::= 
	SEQUENCE {
		utilSpectralScanChannelResultsIndex			Unsigned32,
		utilSpectralScanChannelResultsData			Unsigned32
}	
	utilSpectralScanChannelResultsIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for the table"
	::= {utilSpectralScanChannelResultsEntry 1}
	
	
utilSpectralScanChannelResultsData OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Spectral scan bin power"
	::={ utilSpectralScanChannelResultsEntry 2}

utilSpectralScanResultsDataBlob OBJECT-TYPE
	SYNTAX 			OCTET STRING
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Spectral scan results, reports all powers as 101 member array of uint32_t * N channels in one read"
	::={ utilSpectralScan 6}
utilSpectralScanResultsTimestamp OBJECT-TYPE
	SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
	DESCRIPTION		"System date and time of last performed spectral scan"
	::={ utilSpectralScan 7}
utilSpectralScanNum125kChan OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"number of 125khz channels to scan (default 64)"
	::={ utilSpectralScan 8}
utilSpectralScanStartFreq125k OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Start frequency for 125khz scan (US915 902300k)"
	::={ utilSpectralScan 9}
utilSpectralScanStepFreq125k OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Frequency specing between 125k channels  (default 200k)"
	::={ utilSpectralScan 10}
utilSpectralScanNum500kChan OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"number of 500kHz channels to scan (default 8)"
	::={ utilSpectralScan 11}
utilSpectralScanStartFreq500k OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Start frequency for 500kHz scan (US915 903000k)"
	::={ utilSpectralScan 12}
utilSpectralScanStepFreq500k OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Frequency spacing between 500k channels (default 1600k)"
	::={ utilSpectralScan 13}	
utilSpectralScanExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {utilSpectralScan 100}	
--=============================================
utilSemPktForwarder		OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Packet Forwarder utility branch"
    ::={utilities 6}
utilSemPktForwarderUseGps OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable the GPS as a timing source for the packet forwarder"
    ::= {utilSemPktForwarder 1}	
utilSemPktForwarderCustomConfPath OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Custom configuration .json file to use, leave blank for default config.json"
    ::= {utilSemPktForwarder 2}	
utilSemPktForwarderExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {utilSemPktForwarder 100}	
--=============================================
utilPing		OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Ping utility branch"
    ::={utilities 7}
utilPingCount OBJECT-TYPE
    SYNTAX          Unsigned32 (1..20)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Number of Ping requests to send"
    ::= {utilPing 1}	
utilPingDestination OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Destination server to ping"
    ::= {utilPing 2}
utilPingReceivedCount OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Number of Ping requests received back"
    ::= {utilPing 3}	
utilPingExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {utilPing 100}
--=============================================
utilConfiguration	OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Ping utility branch"
    ::={utilities 8}

utilConfigurationFilesTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF UtilConfigurationFilesType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"list of configuration files"
	::= {utilConfiguration 1}

utilConfigurationFilesEntry OBJECT-TYPE
	SYNTAX			UtilConfigurationFilesType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"single file name"
	INDEX			{utilConfigurationFilesIndex}
	::= {utilConfigurationFilesTable 1}

UtilConfigurationFilesType ::= 
	SEQUENCE {
		utilConfigurationFilesIndex			Unsigned32,
		utilConfigurationFilesFileName     	DisplayString
}

utilConfigurationFilesIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for  files"
	::= {utilConfigurationFilesEntry 1}
	
utilConfigurationFilesFileName OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		" file"
	::={ utilConfigurationFilesEntry 2}
	
utilConfigurationFileSelect OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Select the configuration file to access"
    ::= {utilConfiguration 2}	

utilConfigurationFileContents OBJECT-TYPE
    SYNTAX          DisplayString (SIZE(0..65000))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Contents of the selected configuration file. This OID can report/accept up to 65000 bytes"
    ::= {utilConfiguration 3}
	
utilConfigurationSelectFactoryConfig OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Setting this OID to 1000001 selects the factory default configuration for reading. 
					To restore the factory configuration:
					1) set this OID to 1000001, this selects the default configuration file
					2) read utilConfigurationFileContents (save the default configuration)
					3) set a new destination filename in utilConfigurationFileSelect 
					4) write the default configuration back to utilConfigurationFileContents"
    ::= {utilConfiguration 99}		
utilConfigurationFileDelete OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Setting this OID to 1000001 deletes the file named in utilConfigurationFileSelect OID"
    ::= {utilConfiguration 100}	
--====================================================================
utilSpectrumAnalyzer OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Spectrum analyzer utility branch"
    ::={utilities 9}
utilSpectrumAnalyzerSamplePeriod OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sample period measured in 0.5us"
    ::= {utilSpectrumAnalyzer 1}	
utilSpectrumAnalyzerSampleCount	OBJECT-TYPE
	SYNTAX          Unsigned32 (1..4096)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Number of samples to process per frequency band"
    ::= {utilSpectrumAnalyzer 2}	
utilSpectrumAnalyzerAntenna OBJECT-TYPE
    SYNTAX          Unsigned32  (0..1)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Antenna selection"
    ::= {utilSpectrumAnalyzer 3}	
utilSpectrumAnalyzerStartFrequencykHz OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Start frequency in kHz"
    ::= {utilSpectrumAnalyzer 4}
utilSpectrumAnalyzerStopFrequencykHz OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Stop frequency in kHz"
    ::= {utilSpectrumAnalyzer 5}

utilSpectrumAnalyzerBinSpacingkHz OBJECT-TYPE
    SYNTAX          Unsigned32 (125..1000)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "bin spacing in kHz (default 200)"
    ::= {utilSpectrumAnalyzer 6}
	
utilSpectrumAnalyzerOutputBlob	OBJECT-TYPE
	SYNTAX          OCTET STRING
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Output from the spectrum analyzer. Read this OID to run the utility
					results are immediate"
    ::= {utilSpectrumAnalyzer 100}		

--===============================================================================	
utilRunningCheck OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "returns the name of the utility that is running, or blank string for none"
    ::= {utilities 100}		
--=====================================================================
firewall OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Firewall configuration branch"
    ::={kona 11}	
firewallEnabled OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable firewall"
    ::= {firewall 1}
firewallPing OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Ping branch"
    ::={firewall 2}	

firewallPingEnabled OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable Ping"
    ::= {firewallPing 1}

--firewallPingFromLan OBJECT-TYPE
--    SYNTAX          BoolType
--    MAX-ACCESS      read-write
--    STATUS          current
--    DESCRIPTION     "Ping responds to LAN requests"
--    ::= {firewallPing 2}
--firewallPingFromWan OBJECT-TYPE
--    SYNTAX          BoolType
--    MAX-ACCESS      read-write
--    STATUS          current
--    DESCRIPTION     "Ping responds to WAN requests"
--    ::= {firewallPing 3}

firewallPingLimit OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Firewall filters for ping attack defence"
    ::={firewallPing 4}		
firewallPingLimitEnabled OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable Ping flood attack prevention"
    ::= {firewallPingLimit 1}
firewallPingPerMinLimit OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Ping per minute limit"
    ::= {firewallPingLimit 2}
firewallPingBurstLimit OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Ping burst limit"
    ::= {firewallPingLimit 3}	
	
firewallSsh OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Firewall, Denial of Service prevention"
    ::={firewall 3}	
firewallSshEnabled OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable Ping"
    ::= {firewallSsh 1}

--firewallSshFromLan OBJECT-TYPE
--    SYNTAX          BoolType
--    MAX-ACCESS      read-write
--    STATUS          current
--    DESCRIPTION     "SSH connections accepted from LAN"
--    ::= {firewallSsh 2}
--firewallSshFromWan OBJECT-TYPE
--    SYNTAX          BoolType
--    MAX-ACCESS      read-write
--    STATUS          current
--    DESCRIPTION     "SSH connections accepted from WAN"
--    ::= {firewallSsh 3}
	
firewallDoSPrevention OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Firewall, Denial of Service prevention"
    ::={firewall 4}	

firewallDoSPreventionEnabled OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Enable DoS prevention"
    ::= {firewallDoSPrevention 1}
firewallDoSPreventionPerMinLimit OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "DoS per minute limit"
    ::= {firewallDoSPrevention 2}
firewallDoSPreventionBurstLimit OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "DoS burst limit"
    ::= {firewallDoSPrevention 3}	

firewallFilters OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Firewall filters configuration branch"
    ::={firewall 6}	
	
firewallFiltersTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF FirewallFiltersTableType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"list filter settings"
	::= {firewallFilters 1}

firewallFiltersTableEntry OBJECT-TYPE
	SYNTAX			FirewallFiltersTableType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"single file name"
	INDEX			{firewallFiltersTableIndex}
	::= {firewallFiltersTable 1}

FirewallFiltersTableType ::= 
	SEQUENCE {
		firewallFiltersTableIndex		Unsigned32,
		firewallFiltersName     		DisplayString,
		firewallFiltersDescription		DisplayString,
		firewallFiltersChain     		DisplayString,
        firewallFiltersDstAddr     		DisplayString,
        firewallFiltersDstInterface   	DisplayString,
        firewallFiltersDstMask     		DisplayString,
        firewallFiltersDstPort     		DisplayString,
        firewallFiltersEnabled     		BoolType,        
        firewallFiltersProtocol     	DisplayString,
        firewallFiltersSrcAddr     		DisplayString,
        firewallFiltersSrcInterface   	DisplayString,
        firewallFiltersSrcMac     		DisplayString,
        firewallFiltersSrcMask     		DisplayString,
        firewallFiltersSrcPort     		DisplayString,
        firewallFiltersTarget     		DisplayString,
		firewallFiltersRemoveFilter		BoolType
}
         

firewallFiltersTableIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for the table"
	::= {firewallFiltersTableEntry 1}
firewallFiltersName OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Name of the filter"
	::={ firewallFiltersTableEntry 2}
firewallFiltersDescription OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Description of the filter"
	::={ firewallFiltersTableEntry 3}	
firewallFiltersChain OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Chain for the filter: output, Input, forward"
	::={ firewallFiltersTableEntry 4}
firewallFiltersDstAddr OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Filter destination IP address"
	::={ firewallFiltersTableEntry 5}
firewallFiltersDstInterface OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Destination interface"
	::={ firewallFiltersTableEntry 6}
firewallFiltersDstMask OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Destination mask"
	::={ firewallFiltersTableEntry 7}
firewallFiltersDstPort OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Destination port"
	::={ firewallFiltersTableEntry 8}
firewallFiltersEnabled OBJECT-TYPE
	SYNTAX 			BoolType
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"filter enable/disable"
	::={ firewallFiltersTableEntry 9}

firewallFiltersProtocol OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Protocol selection: 'TCP','UDP','ICMP', or 'ANY' "
	::={ firewallFiltersTableEntry 10}
firewallFiltersSrcAddr OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Source IP address"
	::={ firewallFiltersTableEntry 11}	
firewallFiltersSrcInterface OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Source interface"
	::={ firewallFiltersTableEntry 12}	
firewallFiltersSrcMac OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Source MAC address"
	::={ firewallFiltersTableEntry 13}
firewallFiltersSrcMask	OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Source address mask"
	::={ firewallFiltersTableEntry 14}
firewallFiltersSrcPort OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Source port number"
	::={ firewallFiltersTableEntry 15}	
firewallFiltersTarget OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Filter targets: 'Accept', 'Drop', 'Reject', 'Log'"
	::={ firewallFiltersTableEntry 16}	
firewallFiltersRemoveFilter OBJECT-TYPE
	SYNTAX 			BoolType
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"Setting this OID to true (1) will remove the filter when changes are committed"
	::={ firewallFiltersTableEntry 17}	
firewallUpdateExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Read current firewall settings (1000001) or commit current firewall settings by writing (1000002) to this OID"
    ::= {firewall 100}	
--=====================================================================
wirelessModem OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Wireless modem branch"
    ::={kona 12}
wmDeviceInformation OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Device information branch"
    ::={wirelessModem 1}
wmManufacturer        OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Manufacturer name"
    ::= {wmDeviceInformation 1}
wmModelId           OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Model Identification"
    ::= {wmDeviceInformation 2}
wmFwRevisions OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Firmware Revision"
    ::= {wmDeviceInformation 3}
wmBootRevisions     OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Boot revision"
    ::= {wmDeviceInformation 4}
wmPriRevisions      OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "PRI Revision"
    ::= {wmDeviceInformation 5}
wmPrlVersion        OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "PRL Version"
    ::= {wmDeviceInformation 6}
wmPrlPreference     OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "PRL Preference"
    ::= {wmDeviceInformation 7}
wmImsi               OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "IMSI"
    ::= {wmDeviceInformation 8}
wmEsnNumber         OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "ESN Number"
    ::= {wmDeviceInformation 9}
wmImeiNumber        OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "IMEI Number"
    ::= {wmDeviceInformation 10}
wmMeidNumber        OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "MEID Number"
    ::= {wmDeviceInformation 11}
wmHwRevision  OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Hardware Revision"
    ::= {wmDeviceInformation 12}
wmDeviceState       OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Device State"
    ::= {wmDeviceInformation 13}
wmSimStatus		OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "SIM State"
    ::= {wmDeviceInformation 14}
--====================================
wmHomeNetworkBranch OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Home Network information branch"
    ::={wirelessModem 2}
wmHomeNetwork       OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Home Network"
    ::= {wmHomeNetworkBranch 1}                                                             
wmRoamingStatus     OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Roaming Status"
    ::= {wmHomeNetworkBranch 2}                                                            
wmDataCapabilities  OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Data Capabilities"
    ::= {wmHomeNetworkBranch 3}                                                                      
wmSessionState      OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Session State"
    ::= {wmHomeNetworkBranch 4}                                                        
wmDataBearer        OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Data Bearer"
    ::= {wmHomeNetworkBranch 5}
wmDormancyStatus    OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Dormancy Status"
    ::= {wmHomeNetworkBranch 6}
wmLuRejectCause    OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "LU Reject Cause"
    ::= {wmHomeNetworkBranch 7}
--===========================================
wmRfInformation OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Modem RF information branch"
    ::={wirelessModem 3}
wmRadioInterface    OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Radio Interface"
    ::= {wmRfInformation 1}
wmActiveBandClass  OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Active Band Class"
    ::= {wmRfInformation 2}
wmActiveChannel     OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Active Channel"
    ::= {wmRfInformation 3}
wmSignalStrength    OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Signal Strength"
    ::= {wmRfInformation 4}
wmEcio               OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "ECIO"
    ::= {wmRfInformation 5}
wmIo                 OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "IO"
    ::= {wmRfInformation 6}
wmSinr               OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "SINR"
    ::= {wmRfInformation 7}
wmRsrq               OBJECT-TYPE
    SYNTAX          INTEGER
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "RSRQ"
    ::= {wmRfInformation 8}


--=======================================
wmActiveProfileParameters OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Active profile parameters"
    ::={wirelessModem 4}
wmPdpType           OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "PDP Type"
    ::= {wmActiveProfileParameters 1}
wmAuthentication     OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Authentication"
    ::= {wmActiveProfileParameters 2}
wmProfileName       OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Profile Name"
    ::= {wmActiveProfileParameters 3}
wmApnName           OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "APN Name"
    ::= {wmActiveProfileParameters 4}
wmUserName          OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "User Name"
    ::= {wmActiveProfileParameters 5}
wmIpAddress         OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "IP Address"
    ::= {wmActiveProfileParameters 6}
wmPrimaryDNS        OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Primary DNS"
    ::= {wmActiveProfileParameters 7}
wmSecondaryDNS      OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Secondary DNS"
    ::= {wmActiveProfileParameters 8}


--=============================
wmCallStatistics OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Call Statistics branch"
    ::={wirelessModem 5}
wmCallStatus        OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Call Status"
    ::= {wmCallStatistics 1}
wmBytesTransferred  OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Bytes Transferred"
    ::= {wmCallStatistics 2}
wmBytesReceived     OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Bytes Received"
    ::= {wmCallStatistics 3}
wmCurrentTxRate    OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Current TX Rate"
    ::= {wmCallStatistics 4}
wmCurrentRXRate    OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Current RX Rate"
    ::= {wmCallStatistics 5}
wmMaxTxRate        OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "MAX TX Rate"
    ::= {wmCallStatistics 6}
wmMaxRxRate        OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "MAX RX Rate"
    ::= {wmCallStatistics 7}
--=============================
wmPublicAddress OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Wireless modem phone and ip address branch"
    ::={wirelessModem 6}
wmPublicIPAddr      OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Modem IP Address"
    ::= {wmPublicAddress 1}	
wmPublicPhoneNr     OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Modem phone number"
    ::= {wmPublicAddress 2}	
--=========================================
wmApnBr OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "complete APN settings branch"
    ::={wirelessModem 7}	
wmApnTable OBJECT-TYPE
	SYNTAX 			SEQUENCE OF WmApnType
	MAX-ACCESS  	not-accessible
	STATUS 			current
	DESCRIPTION 	"Receive packet statistics table - Hourly totals"
	::= {wmApnBr 1}
	
wmApnTableEntry OBJECT-TYPE
	SYNTAX			WmApnType
	MAX-ACCESS 		not-accessible
	STATUS 			current
	DESCRIPTION 	"Receive packet statistics table entry"
	INDEX			{wmApnTableIndex}
	::= {wmApnTable 1}
		
WmApnType ::= 
	SEQUENCE {
		wmApnTableIndex		        Unsigned32,
		wmApn         				DisplayString,
		wmApnConnectionType         INTEGER,
		wmApnLocalIndex             Integer32
}

wmApnTableIndex OBJECT-TYPE
	SYNTAX 			Unsigned32
	MAX-ACCESS 		not-accessible
	STATUS        	current
	DESCRIPTION 	"Index for the table"
	::= {wmApnTableEntry 1}
wmApn OBJECT-TYPE
	SYNTAX 			DisplayString
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"APN name"
	::={ wmApnTableEntry 2}
wmApnConnectionType OBJECT-TYPE
	SYNTAX 			INTEGER {ip (0), ppp (1), ipv6(2), ipv4v6(3)}
	MAX-ACCESS 		read-write
	STATUS 			current
	DESCRIPTION		"APN Type - default is IP (0)"
	::={ wmApnTableEntry 3}	
wmApnLocalIndex OBJECT-TYPE
	SYNTAX 			Integer32 
	MAX-ACCESS 		read-only
	STATUS 			current
	DESCRIPTION		"Local profile index as stored in the modem"
	::={ wmApnTableEntry 4}	
wmApnWorkingIndex   OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Read the currently used APN profile"
    ::= {wmApnBr 2}		
wmAddApn            OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Add a new APN entry"
    ::= {wmApnBr 10}		
wmRemoveApn         OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "remove an APN entry"
    ::= {wmApnBr 11}
wmApnLastOperationStatus OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Read the status of the last APN operation"
    ::= {wmApnBr 12}	
--====================================================================
wmFwUpdate OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Wireless modem firmware update"
    ::={wirelessModem 8}
wmFwUpdateUrl       OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Location of the firmware binary"
    ::= {wmFwUpdate 1}		
wmFwUpdateUser      OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Optional, username for authentication"
    ::= {wmFwUpdate 2}		
wmFwUpdatePass      OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Optional, (write only) password for authentication"
    ::= {wmFwUpdate 3}		
wmFwUpdateExecute OBJECT-TYPE
    SYNTAX          INTEGER { ok(0),error(1), busy (2), downloadFile(1000001), updateModem (1000002), resetDownloadDir(1000003) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "1000001 to download files, 
					1000002 to update the modem firmware after files have been updated. 
							When successful, set konaReset = requestRailReset(1000002) to reboot gateway
					1000003 to clear contents of FW download directory"
    ::= {wmFwUpdate 100}			
--=====================================================================
reset OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "reset branch"
    ::={kona 13}
konaReset        OBJECT-TYPE
    SYNTAX       INTEGER { 
					missReport (0),
					dspCrash (1),
					internalErr (2),
					remoteRreset (3),
					requestedReset (4),
					
					requestReset(1000001), 
					requestRailReset (1000002)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Read this OID to get last reset reason, write 1000001 to reboot, 1000002 to do a rail reset (POR)"
    ::= {reset 1}	
--=====================================================================
sshAuthorization OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "ssh branch"
    ::={kona 14}
sshKey              OBJECT-TYPE
    SYNTAX          OCTET STRING (SIZE(2048))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "write only. Set your public ssh key, or write 'REVOKE' to revoke all keys.
					Keys are automatically revoked after 10 minutes from the time the first key is set"
    ::= {sshAuthorization 1}
--=====================================================================
packetForwarder OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "packet forwarder branch"
    ::={kona 15}
currentState        OBJECT-TYPE
    SYNTAX          INTEGER {unknown (0), running (1), stopped (2), partial (3), executeStart (1000001), executeStop (1000002) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Current state of the packet forwarder, write 1000001 to start, 1000002 to stop"
    ::= {packetForwarder 1}	
currentType         OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Currently installed packet forwarder type"
    ::= {packetForwarder 2}
	
supportedTypesTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF NsSupportedTypesTable
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "cell info table"
    ::= {packetForwarder 3}
supportedTypesCellEntry OBJECT-TYPE
    SYNTAX          NsSupportedTypesTable
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell entry for one supported packet forwarder"
    INDEX           {supportedTypeIndex}
    ::= {supportedTypesTable 1}
NsSupportedTypesTable ::= 
    SEQUENCE {
        supportedTypeIndex            Unsigned32,        
        supportedTypeName             DisplayString,      
		supportedTypeDescription      DisplayString
}
supportedTypeIndex  OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Index"
    ::= {supportedTypesCellEntry 1}
supportedTypeName   OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Supported packet forwarder name"
    ::= {supportedTypesCellEntry 2}	
supportedTypeDescription OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Supported packet forwarder description"
    ::= {supportedTypesCellEntry 3}		
nsPacketForwarderSwitch OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "packet forwarder switch branch"
    ::={packetForwarder 4}	
nsNewType             OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Packet forwarder type to be installed"
    ::= {nsPacketForwarderSwitch 1}
nsSourceURL         OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Address where the new packet forwarder is located"
    ::= {nsPacketForwarderSwitch 2}	
nsSourceProtocol    OBJECT-TYPE
    SYNTAX          INTEGER { 
					guessFromUrl (0),
					ftp (1),
					http (2),
					sftp (3),
					localFile (4)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Protocol to download new packet forwarder"
    ::= {nsPacketForwarderSwitch 3}
nsSourceUserName    OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Optional - Username to download new packet forwarder, or leave blank when not used"
    ::= {nsPacketForwarderSwitch 4}
nsSourcePassword    OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Optional - Write-only, password to download new packet forwarder, or leave blank when not used"
    ::= {nsPacketForwarderSwitch 5}	
pktFwdSwitchExecute OBJECT-TYPE
    SYNTAX          INTEGER { ok(0),error(1), none(2), inProgress(3), unknown(4), execute(1000001) }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Set this OID to 1000001 to attempt packet forwarder switch, read this OID to read status of last attempt"
    ::= {nsPacketForwarderSwitch 100}	
	
--=====================================================================
ledControl OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "LED control branch"
    ::={kona 16}

ledBlankingTimeout  OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Timeout in seconds until LED turns off, write 0 to turn off"
    ::= {ledControl 2}	
--=====================================================================
networkPreferences OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Network availability and preferences"
    ::={kona 17}

networkEthernetAvailable  OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Ethernet networking available"
    ::= {networkPreferences 1}	
networkOpticalAvailable  OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Optical networking available"
    ::= {networkPreferences 2}	
networkCellularAvailable  OBJECT-TYPE
    SYNTAX          BoolType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "Cellular networking available"
    ::= {networkPreferences 3}
networkPreferred  OBJECT-TYPE
    SYNTAX          INTEGER { auto(0),ethernet(1),optical(2), cellular(3)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Select the preferred network interface"
    ::= {networkPreferences 4}		
networkFallback  OBJECT-TYPE
    SYNTAX          INTEGER { auto(0),ethernet(1),optical(2), cellular(3)}
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Select the fallback network interface, cannot be same as preferred, setting auto clears both"
    ::= {networkPreferences 5}
networkPingIp OBJECT-TYPE
	SYNTAX          IpAddress
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "Destination IP where to ping. Default is 8.8.8.8, does not work in China"
	::= {networkPreferences 6} 	
networkPreferencesExecute OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "1000001 Commits the network preferences to the system and restarts network management
					 1000002 re-reads the data from the filesystem"
	::= {networkPreferences 100}	

networkConfiguration OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Network configuration branch"
    ::={networkPreferences 1000}
networkConfigInterface OBJECT-TYPE
	SYNTAX          DisplayString
	MAX-ACCESS      read-only
	STATUS          current
	DESCRIPTION     "Interface to modify, currently only eth0 is supported, this is a placeholder"
	::= {networkConfiguration 1} 		
networkConfigType OBJECT-TYPE
	SYNTAX          INTEGER {dhcp(0), static(1)}
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "Type of IP setup, DHCP or static"
	::= {networkConfiguration 2} 		
networkConfigIp OBJECT-TYPE
	SYNTAX          IpAddress
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "When static, write the desired IP address. When DHCP it becomes read-only and reports the current IP of eth0"
	::= {networkConfiguration 3} 	
networkConfigNetmask OBJECT-TYPE
	SYNTAX          IpAddress
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "When static, write the desired netmask. When DHCP it becomes read-only and reports the current netmask of eth0"
	::= {networkConfiguration 4} 	
networkConfigGateway OBJECT-TYPE
	SYNTAX          IpAddress
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "When static, read and write the desired gateway address"
	::= {networkConfiguration 5}
networkConfigDNS1   OBJECT-TYPE
	SYNTAX          IpAddress
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "When static, primary DNS address"
	::= {networkConfiguration 6}
networkConfigDNS2   OBJECT-TYPE
	SYNTAX          IpAddress
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "When static, secondary DNS address"
	::= {networkConfiguration 7}
		
networkConfigExecute OBJECT-TYPE
	SYNTAX          Unsigned32
	MAX-ACCESS      read-write
	STATUS          current
	DESCRIPTION     "1000001 Commits the network configuration to the system
					 1000002 re-reads the data from the filesystem"
	::= {networkConfiguration 100}		
--=====================================================================
--the settings under "factory" should not be used by the customer

factory OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "factory test branch"
    ::={kona 100}	
trx OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "factory test branch for transceiver options"
    ::={factory 1}	

--=========================================================================
trxDebug OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "transceiver debug options"
    ::={trx 4}
trxDebugRegTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF TrxDebugRegCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "cell info table"
    ::= {trxDebug 1}
trxDebugRegCellEntry OBJECT-TYPE
    SYNTAX          TrxDebugRegCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Status entry for one configured cell"
    INDEX           {trxDebugRegIndex}
    ::= {trxDebugRegTable 1}
TrxDebugRegCellType ::= 
    SEQUENCE {
        trxDebugRegIndex             Unsigned32,        
        trxDebugRegValue             Integer32      
}
trxDebugRegIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..2048)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Index"
    ::= {trxDebugRegCellEntry 1}
trxDebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Cell ID"
    ::= {trxDebugRegCellEntry 2}
--======================================================================	
digFpga OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "factory test branch for digital fpga options"
    ::={factory 2}
digFpgaParamTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF DigFpgaParamCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "cell info table"
    ::= {digFpga 1}
digFpgaParamCellEntry OBJECT-TYPE
    SYNTAX          DigFpgaParamCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Status entry for one configured cell"
    INDEX           {digFpgaParamIndex}
    ::= {digFpgaParamTable 1}
DigFpgaParamCellType ::= 
    SEQUENCE {
        digFpgaParamIndex             Unsigned32,        
        digFpgaParamValue             Integer32      
}
digFpgaParamIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Index"
    ::= {digFpgaParamCellEntry 1}
digFpgaParamValue OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Cell ID"
    ::= {digFpgaParamCellEntry 2}
--====================================================================
sx1301 OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "factory test branch for sx1301 options"
    ::={factory 3}		
sxUtilities OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "factory test branch for sx1301 utilities"
    ::={sx1301 2}	

--======================================================================	
sxUtilDebug OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "factory test branch for SX1301 debug access"
    ::={sxUtilities 1}
sxUtilDebugRegTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SxUtilDebugRegCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "cell info table"
    ::= {sxUtilDebug 1}
sxUtilDebugRegCellEntry OBJECT-TYPE
    SYNTAX          SxUtilDebugRegCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Status entry for one configured cell"
    INDEX           {sxUtilDebugRegIndex}
    ::= {sxUtilDebugRegTable 1}
SxUtilDebugRegCellType ::= 
    SEQUENCE {
        sxUtilDebugRegIndex             Unsigned32,        
                sx0DebugRegValue            Integer32,
		sx1DebugRegValue            Integer32,
		sx2DebugRegValue            Integer32,
		sx3DebugRegValue            Integer32,
		sx4DebugRegValue            Integer32,
		sx5DebugRegValue            Integer32,
		sx6DebugRegValue            Integer32,
		sx7DebugRegValue            Integer32
}
sxUtilDebugRegIndex OBJECT-TYPE
    SYNTAX          Unsigned32 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Index"
    ::= {sxUtilDebugRegCellEntry 1}
sx0DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 0 register value"
    ::= {sxUtilDebugRegCellEntry 2}
sx1DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 1 register value"
    ::= {sxUtilDebugRegCellEntry 3}
sx2DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 2 register value"
    ::= {sxUtilDebugRegCellEntry 4}
sx3DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 3 register value"
    ::= {sxUtilDebugRegCellEntry 5}
sx4DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 4 register value"
    ::= {sxUtilDebugRegCellEntry 6}
sx5DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 5 register value"
    ::= {sxUtilDebugRegCellEntry 7}	
sx6DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 6 register value"
    ::= {sxUtilDebugRegCellEntry 8}
sx7DebugRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..255)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Sx1301, instance 7 register value"
    ::= {sxUtilDebugRegCellEntry 9}
--=============================================================
gpioFpgaSync OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "factory test branch for SX1301 debug access"
    ::={factory 4}
gpioFpgaSyncTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF GpioFpgaSyncCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "cell info table"
    ::= {gpioFpgaSync 1}
gpioFpgaSyncCellEntry OBJECT-TYPE
    SYNTAX          GpioFpgaSyncCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Status entry for one configured cell"
    INDEX           {gpioFpgaSyncIndex}
    ::= {gpioFpgaSyncTable 1}
GpioFpgaSyncCellType ::= 
    SEQUENCE {
        gpioFpgaSyncIndex          Unsigned32,        
        gpioFpgaSyncRegValue       Integer32		
}
gpioFpgaSyncIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..128)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Index"
    ::= {gpioFpgaSyncCellEntry 1}
gpioFpgaSyncRegValue OBJECT-TYPE
    SYNTAX          Integer32 (0..65535)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "gpio FPGA Sync register value"
    ::= {gpioFpgaSyncCellEntry 2}	
--========================================= notification destination =============================
notificationConfiguration OBJECT-IDENTITY
    STATUS          current
    DESCRIPTION     "Setup of SNMP notification destinations"
    ::={kona 199}
notificationDestTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF NotificationDestCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "notification destination table"
    ::= {notificationConfiguration 1}
notificationDestCellEntry OBJECT-TYPE
    SYNTAX          NotificationDestCellType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Status entry for one configured cell"
    INDEX           {notificationDestIndex}
    ::= {notificationDestTable 1}
NotificationDestCellType ::= 
    SEQUENCE {
        notificationDestIndex          Unsigned32,        
        
		notificationDestAddr           DisplayString,
		notificationDestPort           Unsigned32,
		notificationDestCommunity	   DisplayString
}
notificationDestIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..128)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Cell Index"
    ::= {notificationDestCellEntry 1}

notificationDestAddr OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Address of the notification destination"
    ::= {notificationDestCellEntry 2}	
notificationDestPort OBJECT-TYPE
    SYNTAX          Unsigned32 (0..65535)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "notification destination port"
    ::= {notificationDestCellEntry 3}
notificationDestCommunity OBJECT-TYPE
    SYNTAX          DisplayString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "name of the community to send the notification"
    ::= {notificationDestCellEntry 4}	
notificationConfigurationExecute OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION     "Execute the function after writing to input OIDs and then writing (1000001) to this OID"
    ::= {notificationConfiguration 100}		
--========================================= Notifications ================================
konaNotifications OBJECT IDENTIFIER ::= { kona 200 }

konaNotificationPrefix  OBJECT IDENTIFIER
                                  ::= { konaNotifications 0 }
konaHmCpuLoadNotificationObjects OBJECT IDENTIFIER
                                  ::= { konaNotifications 1 } 
konaHmMemoryLowNotificationObjects OBJECT IDENTIFIER
                                  ::= { konaNotifications 2 } 								  
konaHmStorageLowNotificationObjects OBJECT IDENTIFIER
                                  ::= { konaNotifications 3 } 
konaHmTemperatureHighNotificationObjects OBJECT IDENTIFIER
                                  ::= { konaNotifications 4 } 
konaHmMissedReportHighNotificationObjects OBJECT IDENTIFIER
                                  ::= { konaNotifications 9 }
konaHmMissedReportLowNotificationObjects OBJECT IDENTIFIER
                                  ::= { konaNotifications 10 }  
konaHmBistFailedNotificationObjects OBJECT IDENTIFIER			
								  ::= { konaNotifications 12 }  					  
konaHmResetNotificationObjects OBJECT IDENTIFIER			
								  ::= { konaNotifications 13 }
konaHmFaultObjects OBJECT IDENTIFIER			
								  ::= { konaNotifications 20 }
konaHmAlarmObjects OBJECT IDENTIFIER			
								  ::= { konaNotifications 21 }
konaHmCpuLoadStateInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "CPU load indication state, 0 = clear, 1 = raised"
    ::= { konaHmCpuLoadNotificationObjects 1 }

konaHmPerfCpu1 OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "1-minute CPU load average"
    ::= { konaHmCpuLoadNotificationObjects 2 }
	
konaHmCpuLoadNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmCpuLoadStateInd, konaHmPerfCpu1}
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 1 }      
--============================
konaHmMemoryLowStateInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Memory low indication state, 0 = clear, 1 = raised"
    ::= { konaHmMemoryLowNotificationObjects 1 }

konaHmMemoryFreeMemInd OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Free memory available"
    ::= { konaHmMemoryLowNotificationObjects 2 }

konaHmMemoryLowNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmMemoryLowStateInd, konaHmMemoryFreeMemInd}
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 2 }  
--============================
konaHmStorageLowStateInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Storage low indication state, 0 = clear, 1 = raised"
    ::= { konaHmStorageLowNotificationObjects 1 }

konaHmStorageSpaceAvailable OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Available Storage"
    ::= { konaHmStorageLowNotificationObjects 2 }

konaHmStorageLowNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmStorageLowStateInd, konaHmStorageSpaceAvailable, perfStorageId}
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 3 }      
--====================================================================
konaHmTemperatureHighStateInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Temperature High indication state, 0 = clear, 1 = raised"
    ::= { konaHmTemperatureHighNotificationObjects 1 }

konaHmTemperatureHighNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmTemperatureHighStateInd, enclosureTemperature}
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 4 }  

	
--============================
konaHmMissedReportHighNameInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Name of item that failed to report"
    ::= { konaHmMissedReportHighNotificationObjects 1 }

konaHmMissedReportHighCountInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Number of times the process failed to report"
    ::= { konaHmMissedReportHighNotificationObjects 2 }

konaHmMissedReportHighNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmMissedReportHighNameInd, konaHmMissedReportHighCountInd }
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 9 }  
--============================
konaHmMissedReportLowNameInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Name of item that failed to report"
    ::= { konaHmMissedReportLowNotificationObjects 1 }

konaHmMissedReportLowCountInd OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Number of times the process failed to report"
    ::= { konaHmMissedReportLowNotificationObjects 2 }

konaHmMissedReportLowNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmMissedReportLowNameInd, konaHmMissedReportLowCountInd }
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 10 } 

--========================================

konaHmBistFailedModuleInd OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Bist Failed - Module Name"
    ::= { konaHmBistFailedNotificationObjects 1 }

konaHmBistFailedTestInd OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "Bist Failed - Test Name"
    ::= { konaHmBistFailedNotificationObjects 2 }

konaHmBistFailedNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmBistFailedModuleInd, konaHmBistFailedTestInd }
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 12 } 


--========================================

konaHmFaultId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "System Health Monitor Fault ID"
    ::= { konaHmFaultObjects 1 }

konaHmFaultState OBJECT-TYPE
    SYNTAX      BoolType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "State of the fault (clear/raised)"
    ::= { konaHmFaultObjects 2 }

konaHmFaultNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmFaultId, konaHmFaultState }
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 20 } 

--========================================

konaHmAlarmId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "System Health Monitor Alarm ID"
    ::= { konaHmAlarmObjects 1 }

konaHmAlarmState OBJECT-TYPE
    SYNTAX      BoolType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "State of the Alarm (clear/raised)"
    ::= { konaHmAlarmObjects 2 }

konaHmAlarmNotification NOTIFICATION-TYPE
    OBJECTS     { konaHmAlarmId, konaHmAlarmState }
    STATUS      current
    DESCRIPTION "This is the actual notification that gets sent out"
    ::= { konaNotificationPrefix 21 } 
END